Shock Sensor Module
Product Use
This Shock Switch Module can be used in both Automotive and Hobby circuits.
Shock Switch Module detects knocks and taps with momentary output.
Operates on 3V
to 5V DC.
When the Sensor is "tapped" or "shocked" the normally HI Output Signal is momentarily switched to Ground (LO).
Depending on the amptitude of this "shock" the signal typically has duration of 50 to 250 micro-seconds.
The Shock Switch Module can be used to provide switching ON signal to any microprocessor such as Parallax Propeller or Arduino.
Features
- Normal Output on S pin is HI = Vbb
- Signal Output on S pin is LO = Ground
- Nominal Voltage 3V to 5V DC
- Operating / Releasing Time ≤ 20 microseconds / ≤ 850 microsseconds
- Multiple Output Pulses per shock ≤ 2 / ≤ 25
- Over 100,000,000 Electronic Cycles Life
- 0.1" Spaced Pins (3)
- PCB Dimesnions: 0.74" X 0.85"
Connection Diagram
Click the image to enlarge.
INPUT / OUTPUT
Connector (J1)
- S OUTPUT
- Vbb Power 3 VDC to 5 VDC +
- GND (Common System Ground)
Product Specifications
| Sensor source voltage (min/max) | VDS | 3 / 5 | V |
| Switch load current (max) | IL | 20 | mA |
| Operating Temperature | Ton | 20 to 140 -6 to 60 |
°F °C |
Pricing
US 5.00 - In stock
Inquire for pricing and availability on purchases of 100 units or more