Solid State Relay
40 A AC DPST-NO
36 to 530 VAC

---

Product Use

This Solid State Relay is especially developed for High Current (up to 40 A) switching of AC loads.

Low Voltage (4 to 15 V DC) and Low Current (Typically 10 to 15 milliAmperes) through the Relay Control electronically switches ON a High Current Load (up to 40A) at 36 to 530 VAC.

In constant ON applications it can carry up to 40 Amperes.

These devices have been reliably used since 2015 in following applications:

• Electric Vehicle Chargers
• Power Supplies
• Power Distribution
• Instrumentation
• Deep Well Water Pump Control

Features

• Solid State = NO moving parts
• Double Pole, Single Throw (Off/On, Normally Open)
• Operating / Releasing Time ≤ 5 ms / ≤ 2 ms
• Control Current 10mA @ 12VDC
• Independent Control for each Pole
• Load Voltage: 36VAC Minimum to 530VAC Maximum
• On-Resistance: 0.05 Ohm Maximum
• I/O Breakdown Voltage: 1500Vrms Minimum

---

Product Specifications

ON Control Current (max)	IF ON	10	mA
Control Voltage (min/max)	VF(on)	4-15	VDC
Continuous Load current TC = 25 °C	ID	40	A AC
Continuous Load current TC = 100 °C	ID	36	A AC
Pulsed Load current TC = 25 °C	ID	40	A AC
Power dissipation TC = 25 °C	P	5	W

---

Pricing

US $29.50 each