Reed Switch Module
Product Use
This Reed Switch Module can be used in both Automotive and Hobby circuits.
Reed Switch Module detects presence of magnetic field with momentary output.
Operates on 3V
to 5V DC.
When the Reed Switch is subjected to magnetic field the normally HI Output Signal is momentarily switched to Ground (LO).
The Reed Switch Module can be used to provide switching ON signal to any microprocessor such as Parallax Propeller or Arduino.
Features
- Normal Output on S pin is HI = Vbb
- Signal Output on S pin is LO = Ground
- Nominal Voltage 3V to 5V DC
- Over 100,000,000 Electronic Cycles Life
- 0.1" Spaced Pins (3)
- PCB Dimesnions: 0.74" X 0.85"
Connection Diagram
Click the image to enlarge.
INPUT / OUTPUT
Connector (J1)
- S OUTPUT
- Vbb Power 3 VDC to 5 VDC +
- GND (Common System Ground)
Product Specifications
| Sensor source voltage (min/max) | VDS | 3 / 5 | V |
| Switch load current (max) | IL | 20 | mA |
| Operating Temperature | Ton | 20 to 140 -6 to 60 |
°F °C |
Pricing
US $ 5.00 - In stock